ThruNite TN4A (XP-L) Cool White LED Torch
Batteries and charger not includedProduct Description
- ThruNite TN4A CW is a compact but powerful LED thrower flashlight with high quality beam from orange peel reflector, which adopts the latest CREE XPL V6 LED to makes output up to 1150 lumens.
- The TN4A CW not only possesses premium type-III hard anodized aircraft-grade aluminum body, but also adopts advanced Intelligent Temperature Control technology to protect it from overheating.
- Moreover, driven by four economical and readily available AA batteries, the TN4A CW will be a good choice for you to use everywhere.
- Compact thrower with high quality beam from smooth peel reflector.
- Adopts latest CREE XP-L V6 LED technology to give great light efficiency.
- Advanced electronic switch with low voltage indication for silent operation.
- ThruNite ITC (intelligent temperature control) technology to prevent possible light damage from overheating.
- Six modes available: Firefly, Low, Medium, High, Turbo and Strobe.
- Reversed polarity protection system prevents damage to the light.
- Ultra clear tempered glass lens with anti-reflective coating.
- Aircraft grade aluminum body structure with knurling for firm grip.
- Premium type III hard anodized anti-abrasive finish.
- Memory function to set any mode (except for Firefly, Turbo and Strobe) for immediate use.
- Applicable for AA batteries to use economically everywhere.
- LED: CREE XP-L V6 LED with a lifespan of 20+ years of run time.
- Runs on: 4 x AA batteries (not included).
- Working Voltage: 2.75V-8V.
- Output mode/Runtime (tested with Four NIMH 2500MAH batteries):
- -Strobe (1150 lumens /150 minutes)
- -Turbo (1150 lumens /56 minutes)
- -High (550 lumens /150 minutes)
- -Medium (139 lumens /14 hrs)
- -Low (15 lumens /93 hrs)
- -Firefly (0.5 lumens /80 days).
- Peak Beam Intensity: 26640cd.
- Max beam distance: 326m.
- Impact resistant: 2 meters.
- Waterproof to IPX-8 Standard (1.5 meters).
- Weight: 218.6g without battery.
- Dimensions: 111.5mm in length, 45.5mm in diameter.
- Accessories: Holster x1, Spare O ring x2, Battery Carrier x1(inside the flashlight), Lanyardx1.
- Turn ON/OFF
- Press the side switch to turn the light on/off.
- Change Modes
- When the light is on, long press the side switch to cycle through Low, Medium and High.
- Shortcut to Firefly: When the light is off, long press the side switch to get Firefly mode.
- Double click to turn to Turbo from any mode. Another double click to get Strobe.
- Memory Function
- The light will turn on in the last mode accessed, except for Firefly, Turbo and Strobe.
- ITC Technology
- The light will automatically lower the current when temperature in LED or driver rises to 80 degrees centigrade to protect the flashlight from overheating.
- Thus to extend its lifespan.
- Battery Replacement
- Unscrew and take off the body near the head, insert four AA batteries into the battery carrier, put the carrier into the flashlight and screw on the body.
- With either end of the battery carrier towards the light head is OK. But make sure the batteries are correctly inserted into the carrier with polarities matched (springs on the carrier should connect with the cathodes of batteries).
- Low Voltage Indication
- When the indicating light on the switch turns from blue to red, it means the batteries should be replaced.
- ThruNiteReview by Keith ives
- Great AA battery torchReview by Terence
- Excellent lightReview by Gary
- 5 stars all the wayReview by Debbie