ThruNite TN36 UT 7300 Bundle

ThruNite TN36 UT

Availability: In stock

As low as: $470.15

Price as configured: $0.00

Fenix ARE-C2 Lithium Ion/NiMh/NiCd Battery Charger   +$64.95
Keeppower 18650 protected 3500mAh rechargeable battery P1835J   +$24.95

* Required Fields

  • Buy 1 with 3% discount each

Price as configured: $0.00

Product Description

Details

ThruNite TN36 UT

We recommend using the Keeppower 18650 protected 3500mAh rechargeable batteries for this model because of the discharge current needed - click here

Features:
  • Compact flood flashlight with high quality beam from orange peel reflector.
  • Cree XHP70 technology gives great light efficiency.
  • Advanced electronic switch with low voltage indication for silent operation.
  • ThruNite ITC(intelligent temperature control) technology to prevent possible light damage from overheating.
  • Six modes: firefly, low, medium, high, turbo and strobe.
  • Reversed polarity protection system prevents damage to the light.
  • Ultra clear tempered glass lens with anti-reflective coating.
  • Aircraft grade aluminum body structure with knurling for firm grip.
  • Premium type III hard anodized anti-abrasive finish.
  • Memory function to set any mode(except for firefly, turbo and strobe) for immediate use.
  • Only applicable for 18650 batteries to use.
Specifications:
  • LED: XHP 70 with a lifespan of 20+ years of run time.
  • Runs on: 4 x 18650 (ThruNite 18650 3200Mah).
  • Working Voltage: 10.5 - 17.5 V.
  • Output mode/Runtime*: Strobe(7300 lumens /137 minutes), Turbo(7300 lumens /95 minutes), High(2500 lumens /194 minutes), Medium(850 lumens /587minutes ), Low(130 lumens /54 hrs), Moonlight(2 lumens /33 days).
  • Max output of NW is a bit less than that of CW.
  • Peak Beam Intensity: 20360cd.
  • Max beam distance: 285m.
  • Impact resistant: 2 meters.
  • Waterproof to IPX-8 Standard (2meters).
  • Weight: 397g without battery.
  • Dimensions: 135.4 mm in length x 64 mm in diameter.
Accessories:
  • Holster x1 Spare
  • O ring x2
  • Battery Carrier x1(inside the flashlight).
Operation:
  • To Turn On/Off The Light:
  • Press the side switch to turn the light on/off.
  • To Change Modes:
  • When the light is on, long press the side switch to cycle through low, medium and high.
  • Shortcut to firefly: When the light is off, long press the side switch to get firefly mode.
  • Double click to turn to turbo from any mode. Another double click to get strobe.
  • Memory Function: The light will turn on in the last mode accessed, except firefly, turbo and strobe.
  • ITC Technology: The light will automatically lower the current when temperature in LED or driver rises to 80 degrees centigrade to protect the flashlight from overheating. Thus to extend its lifespan.
Battery Replacement:
  • Unscrew and take off the body near the head, insert four 18650 batteries into the battery carrier, put the carrier into the flashlight and screw on the body.
  • With either end of the battery carrier towards the light head is OK. But make sure the batteries are correctly inserted into the carrier with polarities matched (springs on the carrier should connect with the cathodes of batteries).
  • Low Voltage Indication: When the indicating light on the switch turns from blue to red, it means the batteries should be replaced or charged.
Special Notes:
  • Please choose an authorized distributor or dealer to purchase ThruNite products.
  • Make sure to use ThruNite products properly.

Additional Information

Additional Information

Manufacturer ThruNite
Max lumens 1301+
LED Type XHP70

Reviews

Blows me away Review by Benjamin
Rating
I was not prepared for how effective this light is. It is quality through and through and feels great in the hand. I would recommend this light to any one wanting one of the strongest and most compact lights out there. Love it. (Posted on 5/09/2016)

Write Your Own Review

You're reviewing: ThruNite TN36 UT 7300 Bundle

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.