EAGTAC D3A Clicky Ti

  • $114.95
    Unit price per 
Tax included.

Only 4 left!

EAGTAC D3A Clicky Ti

Battery and charger not included

*Using 3.7V li-ion significantly increase the LED output and heat. Limit each usage to five minutes or less at high and turbo output. Hold the light in your plam to help removing heat from the LED. If you find the flashlight too warm to hold, turn off the light, or lower the output to allow it to cool down. Do not leave the light running unattended.

*D3A Ti head is made in one piece, and therefore its glass lens is not user replaceable.

What's new?
  • New D3 body style
  • LED Copper MCPCB star board with DTP technology and direct heat path
  • Solid brass heatsink
  • Titanium built and glossy polished finish
  • Features very smooth thread
  • A750 circuit w/ li-ion support
  • Programmable last mode memory and lower-low settings
  • Pre-select output before turning on
  • White switch boot mixed with glow-in-the-dark powder
  • Harden surface treatment

Uses XP-L HI / XM-L2 U4 LED, or Nichia 219C 4000K CRI-92 LED.

  • 405/232/16/2 LED lumen (XM-L2 U4)
  • 286/167/11/2 ANSI FL-1 lumen (XM-L2 U4)
  • 353/199/15/2 LED lumen (XP-L HI V3)
  • 260/145/11/2 ANSI FL-1 lumen (XP-L HI V3)
  • Runtime: 1/2.2/35/150+ hours
  • 2,050 lux @ 1 meter HI LED | Beam distance: 99 yards (91 meters)
  • Twist head for group output, clicky switch for on/off and modes
  • Compatible with 14500 li-ion Battery fitment
  • Operations: (Basic) Press on the switch button until it clicks to switch on. Press the switch again for off. Access output groups 1 & 2 by tighten or loosen the head. Slightly press the switch to switch between different outputs. (Advance) 1) Lower low output -With "Lower low" function disabled, lowest (second lowest) output will increase by about three (two) times.
  • Toggle this setting starting with head loosens, turn on the light, and then repeat tight and loose for three times. 2) Mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times.