Cart 0

EagleTac T20C2 MKII XM-L2 500 lumen LED Torch

  • Save $10
Tax included.
Only 0 left!

EagleTac T20C2

Batteries and charger not included

Features:

  • Water white glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)
  • Impact resistance waterwhite glass lens
  • Smooth aluminium reflector
  • Non-dimming constant current regulation for all output levels without flicking
  • Synchronous buck w/ efficiency of up to 95%
  • HAIII hard anodization aerospace aluminium
  • IPX-8 standard

Specifications:
CREE XM-L2 U2 LED
Center lux: 11,500
Center spot angle: 7°
Spill light angle: 48°
Beam distance: 234 yards / 214 meters
Maximum output of up to 500 LED or 375 ANSI lumens
Runs off 1 x 18650 or 2 x CR123A/RCR123 batteries

Output and Runtime:
Three brightness levels
Runtime:
     1.5/10/100+ hours (2xCR123A)
     2/14/150+ hours (1x18650)
Three hidden auxiliary outputs
    Strobe/Flash-Hi/S.O.S./Beacon5

Dimensions:
Length: 143mm
Head diameter: 33mm
Tube diameter: 25.4mm
Weight: 120g (without battery)

Included Accessories:
1 x Diffuser
1 x Stainless steel bezel (removable)
1 x Battery magazine for two CR123A
1 x GITD (Glow in the dark) switch boot
1 x Tail-stand rubber boot
1 x Lanyard
1 x Titanium coated Stainless steel pocket clip
1 x Soft cigar holding grip
1 x Lanyard ring attachment ring
1 x Spare o-rings
1 x Instructions
1 x Warranty Card

Operations:

  • Tactical forward clicky switch
  • Basic
    • Turn on the light by pressing the tailcap button until it clicks.
    • Tight the head to enable the Turbo output mode, loose the head for general output mode.
    • You can pre-selected output level before turning on the light.
  • Advanced
    • Starting with the head loosen, tight and loose the head within one second to enable hidden modes. Repeat to cycle through all hidden auxiliary modes.
    • Turn on and off the flashlight for 20 times (each click must be within one second) to toggle tailcap strobe settings. When this feature enabled, a double press of the switch will activate strobe mode.