EagleTac GX25A3 XM-L2 1116 lumen LED Torch
- Water white glass lens w/ harden treatment
- Anti-reflective (AR) coating on both side (96% transparency)
- Non-dimming constant current regulation for all output levels without flicking
- Low battery voltage warning
- Turbo boost output (user adjustable to prolong runtime)
- Very low standby current (uA)
- Smooth aluminium reflector
- HAIII hard anodization aerospace aluminium
- IPX-8 standard
CREE XM-L2 U2 LED
Center lux: 20,100 lux
Center spot angle: 6°
Spill light angle: 57°
Beam distance: 311 yards / 284 meters
Maximum output of up to 1116 LED or 915 ANSI lumens
Runs off 3 x AA/14500 batteries
Head diameter: 38.5mm
Tube diameter: 35.5mm
Weight: 148g (without battery)
1 x Extra signal connection through the body tube (pre-installed)
1 x Heavy Duty Nylon Holster
1 x Lanyard
1 x Tail cap with rear switch
1 x Spare o-rings
1 x Instructions
1 x Warranty Card
For momentary on, press and hold the button switch for immediate output.
Twist the head to select between three output levels. You can pre-select the desired output level before turning on the flashlight.
Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).
To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd level and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
(Programmable Features) Mode switching: To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for ten times within five seconds.
(Programmable Features) Energy saving feature: Enabled by default, this feature reduces output current by 45% (or 15% when disabled) after 200 seconds at turbo mode. To toggle this feature, turn on the flashlight at 3rd level, and dial to 2nd level and then back to 3rd level for ten times within five seconds.