EagleTac D25A RC TI Clicky XP-LHI 200 lumen LED Torch

Titanium has the highest strength-to-weight ratio of any metal and superb corrosion resistance, making it ideal for the material choice for our limited edition pocket flashlights.

Availability: Out of stock


Product Description


Batteries and charger not included

Price is for single D25A RC TI torch, images are used for illustrative purpose only and shows both D25A and D25C

New harden surface treatment

The new titanium alloy surface finish is three times harder than pure titanium, making it a lot better against wear and scratch.

CREE XP-L HI V3 LED: 200 LED lumen

What's special?
  • New body style
  • LED soldered directly on copper for direct heatsink
  • Solid brass heatsink
  • Titanium built and glossy polished finish
  • Features very smooth thread
  • A400RC III and A950RC III circuit w/ dimmable output with li-ion
  • Programmable last mode memory (D25C only) and moonlight settings
  • Pre-select output before turning on
  • White switch boot mixed with glow-in-the-dark powder
  • Harden surface treatment
  • AA/14500 flashlight. Must have for titanium collectors.
  • Uses XP-L HI/HD LED, or Nichia 219 5700K CRI-92 LED.
  • 1/11/121/200 LED lumen (XP-L HI V3)
  • 0.5/10/88/147 ANSI FL-1 lumen (XP-L HI V3)
  • Runtime: 1.3/2.5/20/150+ hours
  • 1,200 lux @ 1 meter | Beam distance: 76 yards (69 meters)
  • Twist head for group output, clicky switch for on/off and modes
  • Compatible with 14500 li-ion Battery fitment
  • Operations: (Basic) Press on the switch button until it clicks to switch on. Press the switch again for off. Access output groups 1 & 2 by tighten or loosen the head. Slightly press the switch to switch between different outputs. (Advance) 1)
  • Moonlight output - dim or increase the entire output range of the group 1 output. Toggle this setting starting with head loosens, turn on the light, and then repeat tight and loose for three times.

*Using 3.7V li-ion significantly increase the LED output and heat. Limit each usage to five minutes or less at high and turbo output. Hold the light in your plam to help removing heat from the LED. If you find the flashlight too warm to hold, turn off the light, or lower the output to allow it to cool down. Do not leave the light running unattended.

Additional Information

Additional Information

Manufacturer EagleTac
Max lumens 0-200
LED Type XP-G2


qualityReview by tony
Fantastic quality titanium torch superb i wouldn't hesitate recommending this product as well as Bright Nite for there fantastic service and communication Thanks Again Tony (Posted on 7/04/2017)

Write Your Own Review

You're reviewing: EagleTac D25A RC TI Clicky XP-LHI 200 lumen LED Torch

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.